Need suggestion for CCD front end
I received the following inquiry from a customer. Please provide suggestions: We are considering using a Sony ILX554B, Sony ILX511B, or Hamamatsu S11639 linear monochrome CCD. Do you have analog...
View ArticleAD9548 DPLL is not locked phase
Ignat wrote ("AD9548 DPLL is not locked" http://ez.analog.com/thread/41342) that the PLL has ensured the synchronization frequency, phase but remained decoherent. I think that phase PLL system should...
View ArticleClik here to view.
High pass filter issue for sigma3.9 version.
Hello , I am use Sigma Studio to setting sigmaDSP , but I have some question. High-pass first-order differences between the different versions in SIGMA Studio, Calculated according to the formula...
View ArticleBefore buying the AD-FMCOMMS1-EBZ and KC705/VC707
We would like to plug in the KC705 or VC707 and AD-FMCOMMS1-EBZ into the PCIe slot of a workstation and using a program (Windows preferred)1. Configure the AD-FMCOMMS1-EBZ 2. Transmit and Receive...
View ArticleADI IIO Oscilloscope installation problem.
hi, i am installing IIO Oscilloscope by using below link reference http://wiki.analog.com/resources/tools-software/linux-software/iio_oscilloscope But i observed may errors during installation, i...
View ArticleAD-FMCOMMS3-EB_AD7291BCPZ ADC usgae
Hi, In AD-FMCOMMS3-EB i found that one ADC used and its part number is AD7291BCPZ. I want to know the purpose of this ADC and its functionality?Please provide information on this. Raveendra
View ArticleClik here to view.
AD-FMCJESDADC1-EBZ reference design not working with ZC706?
I have a ZC706 and AD-FMCJESDADC1-EBZ. I am trying to get the reference design located here http://wiki.analog.com/resources/fpga/xilinx/fmc/ad-fmcjesdadc1-ebz up and running. I follow the provided...
View ArticleMissing files in latest FPGA release?
Hi I have downloaded the latest release (fpgahdl_xilinx-ad_fmcomms2_ebz_edk_14_4_2013_10_22) and trying to get the the reference design (cf_ad9361_zc702) up and running in EDK. But there seems to be...
View ArticleADF4154 rev changes or errata?
HEllo:My customer purchased some ADF4154 PLLs a while ago and performed exactly like the simulation. Then they purchased a few more and all parts have higher phase noise on in-loop band and it seems...
View Articlequestion about SPORTs on 2148x
Hi, 1. Can each SPORT be configured independently? For example, SPORT0 has 2x8 channel in at 48K, while SPORT1 has 2x4 channel out at 48K and SPORT2 has 2x4 channel out at 96K. 2x here means two lines...
View ArticleTechniques for compensating for effects of temperature on analog messurement?
Hi, I am using the ADuC7060 for measuring the output of a strain gauge. We have been successful in implementing the AduC7060 in all of the areas we need to complete our project except for one: The...
View ArticleIIO FM Radio dropping samples?
Hello, I am working with the AD9361 FMCOMMS2 board and a Zedboard. From hacking up the IIO Oscilloscope code, I have C code that lets me get IQ data from the 9361 reliably. With this code, I can get...
View ArticleClik here to view.
Questions about Programming Code into SPI Flash with ADSP21479
Hi After my code (work with ADSP21479) passed debug, I programmed the code into the SPI Flash Mem by the generated .ldr file in which I configured as followed: After I programmed the code and tested...
View ArticleQuestion about ASRC and SPORTs on 2148x
Hi, The situation is like this. Now, I have only one SPORT left, and my DAC doesn't support TDM at 192k, but supports 4-ch TDM at 96K, how do I get 4 stereo 192k channels out? It is okay to downsample...
View ArticleADF4154, PC interface board microcontroller software
Hello,My customer is asking if ADI can make the firmware available for the Cypress PSOC (CY7C68013) microcontroller that does the conversion from USB to serial that is on the ADF4154 PC interface board...
View ArticleAD9914/15 POW word
Hi In the AD9914/15 Profiles mode, can anyone confirm that: 1. The POW word should be calculated according to equation given on page 19 of datasheet2. This equation gives a 14 bit word3. This word...
View ArticleFirmware for the AD9959 evaluation board
I've found that for the AD9959, as long as the firmware is loaded on the Cypress USB chip, a 64-bit driver created with the National Instruments VISA driver creation software (associated with LabView...
View ArticleFMCOMMS2 with KC705 and Microblaze ADC values are saturated
I'm using the No-OS project for the FMCOMMS2 targeting Microblaze on the KC705. My ADC values in ChipScope always indicate a saturated full scale input when I input an RF tone, regardless of input...
View ArticleDevice cf-9361-lpc Not Found in IIO Oscilloscope
I have a factory provided SD card that came with the FMCOMMS3. I am trying to implement a simple CW TX-RX measurement. However, in the device selection tab there is no drop down option for...
View ArticleADIS16480 issue
Hi all, We've been using the ADIS16480 in a UAV application and it used to work perfectly. However recently we noticed about 30° of error on the yaw output value (we were not using this value in the...
View Article