HDCP issues with AppleTV (7612 as the Rx)
Hi, The problem below happens with our custom board that uses the ADI repeater app (7612 - 7511 combination), and I verified that this happens on the eval board also. I have EVAL-ADV7612-7511. I will...
View ArticleClik here to view.
Error in API_Library for ADV7842
Hi I use ADV7842 and library “ADV7842_API_Library-Rel1.55.2.1” (http://www.analog.com/static/imported-files/software_modules/ADV7842_API_Library.exe).I found some mistakes (on my opinion) in this...
View ArticleClik here to view.
Is an impedence matching network required with single ended inputs to AD9361?
Can you please shed any light regarding whether or not an impedance matching network is required with the AD9361 when its Rx paths are configured for single-ended input? I read UG-570 to mean that...
View ArticleAdv7391
Hi.I Am using Adv7391 to drive monochrome video on dac1 output in format of monochrome PAL. the output configuration is set to YPbPr. Can I drive the 8 bit digital monochrome video to the Y field...
View ArticleCould ADV7403 support YPBPR/RGB 1080P30 component input?
Hi,We want to use ADV7403 to design a video system with YPbPr/RGB input.Could it support to 1080P30 analog component input? Another question is could ADV7393 support to 1080P30 output? We also want to...
View ArticleADV7125+FPGA standard VGA port & sync
I have a FPGA driving a RGB bus to a ADV7125; which connects to a standard VGA port.It produces the CLOCK, DATA, DE, HSYNC, and VSYNC. But the ADV7125 has composite (?) BLANK# and SYNC#Should I bypass...
View ArticleADV212 HIPI mode issue(compressed image doesn't match the original image)
I have configured all parameters according to the adv212 user_manual and adv202_hipimode_still_image technical paper,All thing seem work well,but the compressed image (exported j2c fifle) from the...
View ArticleRegarding the user name.
Hello, I want to change the user name. Please introduce to me the contact person. Thank you.
View ArticleBitstream from EVAL-CED1Z
Hello, I am a student of the Engineering School of Fribourg in Switzerland. I’m using a EVAL-CED1Z evaluation kit in combination with a AD7400A Delta-Sigma Converter for a school project. I need to...
View ArticleClik here to view.
AD7903 Simultaneous Sampling
Hello, I want to use the AD7903 in the way of Simultaneous Sampling. But Im not sure, how connect them with the SPI interface.http://www.analog.com/static/imported-files/data_sheets/AD7903.pdf page 25...
View ArticleEVAL-7993 not functioning - "Firmware Not Loaded!" error
I just received the EVAL-7993 and have installed the software and restarted my PC. The application starts up and throws and message box indicating 'Firmware Not Loaded!. I then hit the "Load...
View ArticleClik here to view.
A question about AD-FMCOMMS1-EBZ
Hi all: We have a question about measurement AD-FMCOMMS1-EBZ When we use this no-OS Driver from ANALOG DEVICES WIKISet up the ML605 and AD-FMCOMMS1-EBZbut the RF_out signal look like not lock in the...
View ArticleWhat about AD9361 spur performance?
I haven’t seen any spur performance numbers for the AD9361. Does any exist?I’m especially concerned about spurs generated by the fractional-N synthesizer, for example near-integer spurs that are...
View ArticleArbitrary Phase rotation from 0 to 180 degrees?
Hi There! How are you? I would like to provide an arbitrary phase rotation for the subwoofer outputs, so the user can use any phase angle from 0 to 180 degrees (let's say for example 60 degrees). I am...
View ArticleHow to use sigmastudio software to realize an external potentiometer to...
I now do a DSP subwoofer, to implement a feature is: use potentiometer to adjust the phase of 0 ° to 180 °, please tell me how to achieve this?
View ArticleFMCOMMS5
Hi, I recently purchased the new FMCOMMS5 board and struggling to find related information. I got it with 0 documentation : Where can I find the documentation & reference design files for this...
View Articleusb to serial connection with Blackfin BF506 and uClinux
Hello,I am facing a similar problem described by thrum in this discussion. I have a ADZS-BF506F-EZLite board mounting the BF506 chip.I want to connect it to the Linux toolchain with my USB-to-RS232...
View Articlead9520 eval software under win8/virtualbox?
I've been using the eval software under 64-bit windows 7. I want to use the eval software on my 32-bit ubuntu 14.04 laptop. I've installed VirtualBox 4.3.18 and am hosting 32-bit win8. The win8 seems...
View ArticleADV7619 color space conversion
Hi,I'm trying to use the ADV7619 to convert a YCbCr input to RGB output when the source is DVI putting out YCbCr. I know this signal is out of spec (DVI is RGB only), but I want to be able to handle...
View Article