Hi,
Setting HDMI input type has only to do with Free Running;
additionally when parameters are auto-buffered - the HDMI receiver
will output free run timing of exactly same parameters as previously received.
Therefore in many scripts we set part to HDMI-COMP 525P.
This are settings to enable UXGA60 Free-Run without free running:
UXGA60:
PRIM_MODE = HMDI-GR.
VID_STD = 010110 UXGA 1600x1200 @60
UXGA60-with reduced blanking:
PRIM_MODE = HMDI-GR.
VID_STD = 010111 UXGAR 1600x1200 @60
Above settings will be added to the next revision of hardware manual of ADV7611, ADV7612, ADV7619
Rgds,
vito